Whirlpool LSC8244EQ0 - Manual (Page 7)

7
7. (OPTIONAL STEP) If desired, on
models with the Extra Rinse option,
set the CLEAN TOUCH Extra Rinse
Selector to On to add a rinse and spin
to the end of the wash cycle.
• Use the Extra Rinse option when adding
extra detergent for the Super Wash
cycle, or any other cycle, depending on
your model.
8. (OPTIONAL STEP) If desired, on
models with the end-of-cycle signal
option, set the CLEAN TOUCH™
Cycle Signal to On if you want the
washer to alert you when the wash
cycle is complete.
• The signal is helpful when you are
washing items that should be removed
from the washer as soon as the
cycle ends.
9. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle
you want. See pages 8 and 9.
10. Pull out the Cycle Control Knob to
start the washer.
Stopping/restarting your washer
• To stop the washer at any time, push in
the Cycle Control Knob.
• To restart the washer, close the lid
(if necessary) and pull out the Cycle
Control Knob.
Extra Rinse
On Off
Options
CLEAN TOUCH
Selector
CLEAN TOUCH
Selector
Cycle Signal
On Off
Options
O P E R A T I N G Y O U R W A S H E R