Weider 831.153931 - Manual (Page 20)

20
57. Attach the Seat (16) to the Seat Frame (8) with two
1/4” x 3/4” Screws (114), a 1/4” x 2 1/2” Screw (99),
and a 1/4” Washer (97).
58. Attach the Butterfly Backrest (15) to the Butterfly
Upright (3) with four 1/4” x 3/4” Screws (114).
59. Wet one end of the Squat Arm (32) with soapy
water. Slide a Short Pad (20) onto the Squat Arm
as shown.
Slide two Nut Clips (108) onto a Squat Handle (33).
Attach the Squat Handle to the Squat Arm (32) with
two 5/16” x 3/4” Button Head Screws (51). Slide an
Inner Cap w/Hole (111) onto the Squat Handle and
press it onto the end of the Squat Arm. Wet the
Squat Handle with soapy water. Slide an 8”
Handgrip (84) onto the Squat Handle.
Repeat this step with the other end of the Squat
Arm (32).
57
58
59
51
51
20
108
108
20
32
33
111
84
97
114
114
99
114
16
8
15
3
60
60. Attach the Squat Arm (32) to the Squat Bracket (37)
with two 3/8” x 2 1/2” Carriage Bolts (106) and two
3/8” Nylon Locknuts (87). Do not tighten the
Nylon Locknuts yet.
Finish attaching the Squat Arm (32) to the Squat
Bracket (37) with two 3/8” x 3” Carriage Bolts (126),
a Small Support Plate (127), and two 3/8” Nylon
Locknuts (87).
Tighten all of the 3/8” Nylon Locknuts (87) used
in this step.
87
32
106
37
127
126
87