Whistler 1670 - Manual (Page 19)

OPERATION
• Press and release the (Quiet/Record) button to begin
a recording. Note: Recording starts as soon as the button
is released. Display reads:
REC = record, 1 = track #, 8 = time remaining
If the recording time expires for a track, the unit will auto-
matically switch to the next track. Press and release
(Quiet/Record) again to stop recording. The unit will
automatically stop recording once track 6 is completed.
To play a message:
• Enter Memo mode and press (Power/Play) to listen to
recorded messages.
• To play a selected track, press (Volume Up) or
(Volume Down) button until selected track appears on
the display. Display reads:
PLY = play, 1 = track #, 8 = time remaining
• Press the (Power/Play) button.
Messages are kept in memory and are not affected by
resetting the factory features. See “Reset Features” sec-
tion of the manual.
To delete a message:
• Enter Memo mode and press (Volume Up) or
(Volume Down) button until selected track appears on
the display.
• Press the (Quiet/Record) button twice.
REC1 8
PLY1 8
17