Specifications, Engine, Electrical system – Walker MB (18 HP) User Manual

Page 7: Transmission

Advertising
background image

Specifications

5

MODEL

MB

ENGINE

Manufacturer/Model

Briggs and Stratton Vanguard, 2 Cyl. OHV (Air-Cooled)

Displacement

34.7 cu. in. (570 cc)

HP (@ 3600 RPM)

18.0

Max. RPM (No Load)

3600

±

100

Governed RPM

3600

±

100

Max. Torque [ft-lb (N

m) @ RPM]

29.5 (40.5)

@ 2400

Idle RPM

1750

Spark Plug Type

Champion RC14YC

Spark Plug Gap

.030 in. (.75 mm)

Crankcase Capacity

1.5 qts (1.4 liters)

Crankcase Lubricant

SF/SG/SH/SJ or Higher Grade Oil Only with 30W Viscosity
Above 40° F (4° C)

Fuel Tank Capacity

3 Gallons (11.35 liters)

Fuel

Automotive Grade Unleaded Gasoline (85 Octane)

Cooling System

Air Cooled

ELECTRICAL SYSTEM

Battery

12 Volt, 220 CCA (Interstate PC12/80)

Charging System

Flywheel Alternator

Charging Output

16 Amp DC (Regulated)

System Polarity

Negative Ground

Ignition

Magnetron

®

Electronic

Starter

12 Volt Electric Key and Solenoid Operated

Interlock Switch

Ignition Lockout by Seat Switch, Transmission Neutral and Blade Clutch

TRANSMISSION

Manufacturer/Model

Dual, Independent Hydro-Gear Integrated Transaxles

Steering

Hand Lever Control / Individual Wheel

Forward Speed Control

Precision Friction Lock Lever, Cruise Control, with Neutral-Park
Position

Service Brake

Dynamic Braking through Hydrostatic Transmission

Parking Brake

Mechanical Cog Lock in Transmission Gear

Neutral

Transmission Release by Manual Dump Valve

Final Drive

Direct Drive Axle from Transaxle

Advertising