Wadia Digital 270 - Manual (Page 15)

The Wadia 270 Compact Disc Transport features a two-part display screen.
The bottom section
is an alphanumeric
display that shows
the status of some
as the track number
of the Wadia 270
special functions.
During Normal operation the bottom portion of the screen will indicate whether Clocklink
is operating and which Resolution Enhancement Mode has been selected. For example:
Note: If ClockLink
has been disabled
(see Configurations),
then the status screen
will not display whether
ClockLink is active.
CONFIGURATION SCREENS
These screens are used to change the user-configurable features of the Wadia 270.
For example, here is the screen used to configure Clocklink:
Note: For instructions
on how to Configure
the Wadia 270,
please see
Configurations.
CHANGING BETWEEN DISPLAY SCREENS
Pressing the ENTER key will cause the display to change to the next display screen. As you
continue to press the enter key, the display will “scroll” through all available display screens,
then return to the beginning. The order of the display screens is:
1. Main Status Screen
2. Emphasis Screen (displays whether disc is recorded using pre-emphasis)
3. Configure Output 1
4. Configure Output 2
5. Configure Output 3
6. Configure Clocklink
7. Configure Resolution Enhancement