Usage – Kaiser EM2000 User Manual
Page 26
EN
26
USAGE
DIGITAL CLOCK TIMER
WITH FULL SENSOR CONTROL
LOGIC CONTROL
Setting the clock
After your microwave oven is first plugged in or after a
power failure, the clock will flash to indicate that the time
is not correct.
•
Touch the key .
digits
start to flash to
•
Touch the keys
to set the hours.
•
Touch again the key
to set the minutes.
The minute digits will start to flash.
•
Touch the keys
to set the minutes.
•
To finish, touch the key
again.
To reset the time:
•
Touch the key
for 1 second.
•
Repeat the forenamed actions.
If any function has been chosen, but not started by
touching the
button
, this function is
cancelled in 60 seconds.
The digital time switch clock passes in the
,
thus burn keys of working functions the clock setting
key , current time on the the display , keys
,
and
, .
If the device is in the Initial mode more than 60 seconds
it passes in the
.
To set the current time:
The
show that you are in clock
setting mode.
1
3
1
3
1
1
4
1
2
4
5
2
Initial mode
Initial mode
,
energy-saving mode
START
START
STOP
1
3
5
4
2