Etting the controls, Cont, Using the self-cleaning cycle – Whirlpool GR395LXG User Manual

Page 32

Advertising
background image

32

32

YOU SEE

ON

HEAT

D

TIME

CLEAN
TIME

LOCKED

YOU SEE

CLEAN

2.

Set the cleaning time (optional).

If you want a Self-Cleaning cycle longer or
shorter than 3

1

2

hours, use the hour and minute

pads to set the cleaning time you want. Press
the “up” (s) or “down” (t) pad(s) until a time
between 2

1

2

-4

1

2

hours shows on the display.

Use 2

1

2

hours for light soil.

Use 3

1

2

-4

1

2

hours for average to heavy soil.

3.

Press DELAY START TIME.

4.

Set the start time.

Press the “up” (s) or “down” (t) pad(s) until the
desired start time shows on the display. The
oven will automatically come up with the stop
time by adding the set cleaning time to the set
start time.

5.

Press START/ENTER.

S

ETTING THE CONTROLS

(

CONT

.

)

USING THE SELF-CLEANING CYCLE

HR

MIN

START

CLEAN
TIME

(example for 2:30 start time)

PRESS

YOU SEE

PRESS

YOU SEE

START

ENTER

5 SEC

ON

DELAY

CLEAN

PRESS

YOU SEE

(example for 4

1

2

-hour cycle)

HR

MIN

CLEAN
TIME

PRESS

YOU SEE

DELAY

START

TIME

START

CLEAN
TIME

6.

After the Self-Cleaning cycle starts:

The door will lock as soon as the oven starts to
heat up.

7.

After the Self-Cleaning cycle ends:

LOCKED goes off and the door unlocks.

NOTE: The stop time will be the start time plus
the cleaning time.

Advertising