Weider WESY37530 - Manual (Page 11)

15. Open the part bag labeled “ARM ASSEMBLY.”
Press a 50mm x 75mm Inner Cap (45) into the
Leg Press Arm (12).
Lubricate an M12 x 104mm Bolt (67) with grease.
Attach the Leg Press Arm (12) to the Right Base
(1) with the Bolt and an M12 Nylon Locknut (81).
Do not overtighten the Locknut; the Leg Press
Arm must be able to pivot easily.
16. Lubricate an M12 x 104mm Bolt (67) with grease.
Attach the Leg Press Plate (13) to the Leg Press
Arm (12) with the Bolt and an M12 Nylon Locknut
(81). Make sure the bar is closer to the
ground. Do not overtighten the Locknut; the
Leg Press Plate must be able to pivot easily.
15
45
67
Lubricate
81
12
1
Arm Assembly
67
13
Lubricate
Bar
81
12
16
17. Lubricate an M12 x 104mm Bolt (67) with grease.
Attach the Press Frame (14) to the Right Base (1)
with the Bolt and an M12 Nylon Locknut (81).
Make sure the hole is closer to the indicated
side of the Press Frame. Do not overtighten
the Locknut; the Press Frame must be able to
pivot easily.
17
81
14
Lubricate
Hole
1
67
11