West Bend 56600 - Manual (Page 3)

3
1. Have switch in OFF position. Press BREW button once, then immediately press HOUR button to enter desired hour along with correct
AM or PM you wish coffeemaker to turn on. Then press MIN button if minutes need to be programmed.
NOTE: You have 5 seconds to being entering auto brew time after the BREW button is pressed. If time of day reappears in display
before brew time is entered, simply press the BREW button once, then immediately enter hour and minutes as directed above.
After auto brew time is entered the time of day will appear in display. To confirm correct auto brew time, press BREW button only.
Brew time will appear in display for 5 seconds, the time of day will reappear.
2. Slide switch to AUTO position. Word AUTO will appear in top left corner of display. When clock advances to auto brew time,
coffeemaker will turn on and the ON light will glow. Slide switch to OFF position after coffee is served.
SPECIAL NOTE: Coffeemaker will turn back on the same programmed time the next day if switch is left in the AUTO position. To prevent
this from happening by mistake, always slide switch to OFF position after each use. If you want coffeemaker to start at same programmed
time the next day, prepare coffeemaker for brewing and slide switch to AUTO.
USING PAUSE ‘N SERVE FEATURE (All Models)
Pause ‘n Serve feature lets you pour a cup of coffee white it is being brewed. For optimum flavor, allow half the quantity of coffee to finish
brewing before removing carafe. Remove carafe to pour coffee. Return carafe within 30 seconds to prevent possible flooding. To prevent
scalding injury, do not remove any part of coffeemaker, other than the carafe, during the brewing cycle.
GENERAL CLEANING (All Models)
1.
Turn OFF, unplug cord and allow to cool.
2. Wash basket, carafe and cover in hot soapy water with a dishcloth or sponge. Rinse and dry
Note: Never use metal scouring pads or abrasive cleansers on carafe as scratching can occur with can cause the glass to break.
3. Wipe outside of coffeemaker with damp cloth and dry. If coffeemaker is turned upside down, use caution as hot water may flow from
reservoir or spreader areas.
CAUTION: To prevent personal injury or electric shock, do not immerse coffeemaker base, its cord or plug or water or other liquid.
• Dishwasher Cleaning
Basket, carafe and cover may be cleaned in automatic dishwasher, TOP RACK ONLY. To prevent scratching, place pieces in rack so they
do not touch one another or objects being cleaned.
• Special Cleaning to Remove Mineral Deposits
Minerals in water will build up inside coffeemaker during use. Deposits must be removed every 30 days (if coffeemaker used daily) to
prevent clogging of parts, affecting performance. More frequent cleaning may be necessary if your water is very hard.
Follow these steps:
1. Put paper filter in basket. Attach basket to coffeemaker.
2. Pour white distilled vinegar into carafe to 6-cup level. Pour into reservoir. Place covered carafe on keep warm plate. Plug coffeemaker
in; turn ON. Allow vinegar to cycle into carafe. Turn OFF. Pour vinegar back into reservoir. Cool 20 minutes. Repeat procedure 4 to
5 times. (If coffeemaker does not turn back on between cleanings, allow to cool longer to reset thermostat.)
3. Discard, vinegar. Fill carafe with cold water to maximum cup level. Cycle through assembled coffeemaker to rinse parts.
4. Turn OFF; unplug cord from outlet and cool.
5. Follow general cleaning instructions.
REPLACEMENT PARTS
Non-electrical replacement parts for your West Bend® Quik Drip Coffeemaker, may be obtained directly from the company’s Customer
Service Department. Order online at: www.westbend.com or write or call:
The West Bend Company
Attn: Housewares Customer Service Department
P.O. Box 2780
West Bend, WI 53095-2780
(262) 334-6949
Be sure to include the model number of your coffeemaker, a description of the part you want and the quantity. Along with this information
please include your name, address, phone number and your Visa, MasterCard and Discover credit card number for the billing of the part(s) to
you. Your state’s sales tax and a shipping/handling charge will be added to your total charge. Or to send a check or money order call (262)
334-6949 to obtain purchase amount. Please allow 2 to 3 weeks for delivery.