Weider WEMC0942.1 - Manual (Page 3)

3
WARNING
: To reduce the risk of serious injury, read the following important precautions
before using the resistance system.
IMPORTANT PRECAUTIONS
1. Read all instructions in this manual and in the
literature accompanying the resistance sys-
tem before using the resistance system. Use
the resistance system only as described in
the literature.
2. It is the responsibility of the owner to ensure
that all users of the resistance system are
adequately informed of all precautions.
3. Keep children under 12 and pets away from
the resistance system at all times.
4. Keep hands and feet away from moving parts.
5. Use only the resistance included with a MAX
PACK. Do not use other types of weight with
the resistance system.
6. When adding resistance, both ends of the
resistance bars must rest under the two “U”-
channels. Add and remove resistance bars
from the “U”-channels one resistance bar at a
time.
7. Keep clear of the area around the “U”-chan-
nels while the resistance system is in use. Do
not add or remove resistance bars from the
“U”-channels while the end of the long cable
is pulled out.
8. Make sure that all parts are properly tight-
ened each time the resistance system is
used. Replace any worn parts immediately.
9. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
BEFORE YOU BEGIN
Thank you for selecting the MAX by WEIDER ™ resis-
tance system MAX PACK accessory. The MAX by WEI-
DER uses progressive resistance. As the resistance
bars begin to bend, the amount of resistance will
increase gradually. As the resistance bars bend further,
the resistance will increase rapidly. The MAX PACK is
designed to increase the amount of resistance avail-
able on the MAX by WEIDER resistance system.
For your benefit, read this manual carefully before
using the MAX PACK and the resistance system. If
you have questions after reading this manual, see the
front cover of this manual. To help us assist you,
please note the product model number and serial
number before calling. The model number is
WEMC0942.1. The serial number can be found on the
product packaging. Record the serial number on the
front cover of this manual.
To avoid a registration fee for any service needed
under warranty, you must register the MAX PACK
accessory at www.weiderservice.com/registration.