Weslo Daybreak 408 WLHS43081 - Manual (Page 11)

11
SPA OPERATION
Refer to the diagram above. The function of each
component is explained below.
The suction vents (A) located near the floor of the
spa bring the water into the pump in order to operate
the system. The suction covers should always be in
place over the suction vents. Never operate the spa
without the suction covers in place.
The filter (B) can be removed for replacement and
cleaning (see CHECKING AND CLEANING THE FIL-
TER on page 13).
The temperature probe (C) reads the current water
temperature.
Use of the console (D) is explained on page 12 of
this manual.
The hydrotherapy spa offers an automatic freeze pro-
tection. If the water temperature falls below 40ûF, the
pump will begin circulating the water to prevent the
water from freezing.
SECURING THE SPA COVER
The spa cover can be
secured by snapping
the latches on the spa
cover into the buckles
on the side panels.
The buckles can be
locked by inserting the
key and turning it
clockwise a quarter
turn. To unlock the buckles, insert the key and turn it
counterclockwise a quarter turn.
Always keep the buckles locked when the spa is
not in use. Keep the keys in a safe place, out of
the reach of children.
Spa Shell Diagram
A
C
B
D
Latch
Key
Buckle