Wilton Belt And Disc Sander - Manual (Page 2)

2" x 42" BENCH
BELT AND DISC SANDER
•
Deluxe miter gauge that turns and locks for common angles 45º both left and right
• Hinged idler wheel cover
• Abrasive belt unit does the work of a jig saw, coping saw or hand file while removing
material and finishing at the same time, allows the operator to get into small openings,
plus handle odd shapes and angles
• Allows for sanding, grinding or finishing of outside, curves or odd shaped work pieces on
the belt
• Grind, sand or finish large work pieces on the disc unit fast and efficiently; combined with
the tilting table, the operator has the advantage of chamfering or beveling, table is slotted
to accept miter gauge
• Delivers sharper, faster cutting action; easy belt changes with a variety of grit belts, keeps
the machine cool, so one can complete a wide range of jobs
• When using non-woven synthetic belts the operator can blend, polish, buff or finish metal
surfaces in addition to defuzzing wood surfaces
STANDARD EQUIPMENT
• Deluxe miter guage
• Cast iron tilting table
• Cast constrution
• Heavy-duty steel base and rubber feet
• Removable platen
•
Dust deflector and chute
wiltontool.com
2" x 42" Bench Belt
and Disc Sander
STOCK NUMBER 41002
Overall Dimensions (in./W x D x H) 20-1/2x22-3/4x20
Belt Size (in./W x L) 2 x 42
Belt Speed (SFPM) 3100
Belt Table Size (in./L x W) 10 x 6
Belt and Disc Table Tilt 0 to 45°
Disc Diameter (in.) 8
Disc Speed (RPM) 3450
Disc Table Size (in./L xW) 10-3/4 x 7-1/2
Dust Collection Outlet (in.) 1-1/2
Motor 3/4HP, 1Ph, 115V
Machine Dimensions (in./W x D x H) 20-1/2 x 22-3/4 x 20
Net Weight (lbs.) 69
STOCK NO. 900490
07/06 10M
©2006 WMH TOOL GROUP, INC. All Rights Reserved.