Wolfgang Puck BISTRO BHM00240C - Manual (Page 2)

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed, including the following:
1 Read all instructions carefully.
2 To protect against risk of electrical shock, do not put mixer, cord or
plug in water or other liquid.
3 Close supervision is necessary when any appliance is used by or
near children.
4 Turn unit off and unplug from outlet when not in use, before putting
on or taking off parts, and before cleaning. To disconnect, turn unit
off, grasp plug, and pull from the wall. Never yank on cord.
5 Avoid contact with moving parts. Keep hands, hair, clothing as well
as spatulas and other utensils, away from beaters or dough hooks
during operation to prevent injury and/or damage to the mixer.
6 Remove beaters and dough hooks from mixer before washing.
7 Do not operate any appliance with a damaged cord or plug or after
the appliance malfunctions or is dropped or damaged in any manner.
Return the appliance to an authorized service facility for exami-
nation, repair, or electrical or mechanical adjustment.
8 The use of attachments not recommended or sold by the appliance
manufacturer may cause fire, electric shock, or injury.
9 Do not use outdoors.
10 Do not let cord hang over edge of table or counter or touch hot
surfaces, including the stove.
11 Mixing flammable non-food substances can be harmful.
12 Do not use this appliance for other than intended use.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
1 2
This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
Before Your First Use
Carefully unpack the mixer and remove all packaging materials. Wash the
dough hooks and beaters in warm, soapy water to remove any dust that may
have accumulated during packaging. Do not immerse the mixer body, cord or
plug in water. Wipe the mixer body with a damp cloth.
TSC07_HM00240C 1/19/07 9:50 PM Page 3