Wasp Bar Code WLP 4170 CCD - Manual (Page 9)

NOTE: Scanning these bar codes returns the scanner to
the factory default settings
1. Scan “Begin ”
2. Scan “Default” to restore
scanner to default settings
6
Tip: Use this configuration to restore the factory default settings if you are
unsure how your scanner has been configured. The 'Factory Default'
configuration is very useful when you need to reprogram your Wasp
WLP 4170 CCD Scanner after the defaults have been changed. By setting
the default configuration, the user knows precisely the configuration for each
programmed setting.
Setup & Configuration
—Factory Default
Begin
Default