Cleaning your toaster – West Bend STAINLESS STEEL TOASTER User Manual

Page 5

Advertising
background image

5

1.

Place toaster on a dry, level, heat-resistant surface, away from any edge or
flammable materials. Plug cord into 120 volt AC outlet only.

2.

Place one piece per toaster slot of bread, bagels, English muffins, pastry slices,
etc., into bread slots. Select toast color setting from 1 (light) to 6 (dark).

3.

Press the toast lever down until it locks into place. Toasting cycle will
automatically begin. Toaster must be plugged in for toast lever to lock in place.
Toast will pop up and toaster will turn off when the selected color is reached.
The toast cycle can be stopped any time by pressing the cancel button. Note:
Do not attempt to dislodge food when toaster is plugged in.

4.

Unplug the cord from wall outlet when not in use and allow to cool before cleaning.


Bagel Setting: The bagel setting automatically turns off the inside toasting element for
each pair of slots. The cut-side of bagel will be toasted when placed toward the outside
of each pair of slots. To use, press toast lever down and press the bagel button. The
bagel indicator light will glow when activated.

Defrost Setting: The defrost setting will take the bread/frozen pastry from frozen to
toasted in one step. To use, press toast lever down and press the defrost button.
The defrost indicator light will glow when activated.

Reheat Setting: The reheat setting will warm toasted foods that have become cold
without additional toasting. To use, press toast lever down and press the reheat
button. The reheat indicator light will glow when activated. Reheating takes about 30
seconds. Food will pop up when warmed.

Note: The above settings can only be activated after the toast lever is pushed down
and locked.
• Some smoke and/or odor may occur upon first heating due to the release of

manufacturing oils – this is normal

• Some expansion/contraction sounds may occur during heating and cooling – this

is normal.

C

LEANING

Y

OUR

T

OASTER

1. Unplug toaster from outlet and allow to cool before cleaning. Slide crumb tray

out from under toaster, empty and wipe clean with damp cloth if necessary.
Replace the crumb tray. Note: Failure to clean crumb tray regularly may result
in fire hazard.

2. Wipe the outside surfaces of toaster with a damp cloth and dry thoroughly. Do

not use any metal or abrasive scouring pads or cleansers on any toaster
surfaces. To clean the inside of toaster, turn toaster upside down over sink and
shake crumbs free.

3. Wrap cord around clips on underside of toaster for storage if desired.

Advertising