Zebra Technologies Printers - Manual (Page 32)

Step 12 Set label detection parameters for media:
• Use the AutoSense procedure for first time
use of new media to set the transmissive
(gap) sensor.
• Use the AutoSense procedure for detection
of label and gap lengths.
• Use EPL2 programming
(Q) command
to
set form length (and gap) as well as media de-
tection and control method for sensing label
gap, black mark or continuous (unmarked)
media.
Windows Users!
Use Settings / Printers on the Start Menu of
Windows 95 or Windows NT versions 3.51 &
4.0 to select the label size that matches the labels
loaded in the printer.
24
980181-001 Rev.C
Operation