Xerox XES 8855 - Manual (Page 17)

11
MEDIA INFORMATION
Loading the Media - Roll 4
1. Pull the handle and open
the drawer which requires
the media.
2. Rewind the paper
remaining on the roll.
3. Hold the roll at both ends
and lift the roll out of the
drawer.
4. Press the green locking
lever at the end of the
spindle.
5. Slide the spindle out of the
paper core.
6. Press the green locking
lever and insert the spindle
into the new roll of paper.
7. Align the edge of the roll
with the appropriate width
dimension on the spindle.
NOTE: To avoid unnecessary
strain, load the heaviest roll in
the Top Drawer and the
lightest rolls at the bottom.
8. Hold the roll at both ends
and set the roll into the
drawer.
9. Insert the lead edge of the
paper between the upper
and lower feed rollers.