ZyXEL Communications NBG-415N - Manual (Page 46)

ZyXEL NBG-415N User’s Guide
Chapter 4 WAN 46
Figure 32 Basic: WAN: Static IP
The following table describes the related fields in this screen.
Refer to Table 13 on page 44 for other field descriptions.
4.2.3 WAN Configuration: PPPoE
If your ISP uses the PPPoE (Point-to-Point Protocol over Ethernet) protocol for Internet
access, select PPPoE in the WAN Mode field.
Table 14 Basic: WAN: Static IP
LABEL DESCRIPTION
MODES
WAN Select Static IP if your ISP gives you a fixed public IP address.
STATIC IP
IP Address Enter the WAN IP address exactly as given by your ISP in dotted decimal
notation.
Subnet Mask Enter the IP subnet mask as given by your ISP in dotted decimal notation.
Default
Gateway
Enter the gateway IP address as given by your ISP in dotted decimal notation.