ZyXEL Communications NWD210N - Manual (Page 31)

30
ENGLISH
The following table describes the labels in this screen.
Table 9 The Advanced Screen
LABEL DESCRIPTION
Wireless
Mode Select the type of network to which you want to
connect.
• Select 802.11 B/G mixed mode to connect to
IEEE 802.11b or IEEE 802.11g devices.
• Select 802.1.1 B mode to connect to IEEE
802.11b devices only.
• Select 802.11 B/G/N mixed mode to connect to
IEEE 802.11b, 802.11g or 802.11n wireless
devices. Choose this if you are not sure which to
use.
TX Rate This field displays the maximum rate at which
data is sent by the NWD210N over the wireless
network.
• When you select 802.11 B/G mixed mode or
802.11 B/G/N mixed mode in the Wireless
Mode field, this field is set to Auto and is not
user-configurable.
• When you select 802.1.1 B mode in the
Wireless Mode field, select Auto to have the
NWD210N choose the highest speed the network
supports, or select 1, 2, 5.5 or 11 Mbps.
Enable TX
Burst Select this to turn burst transmission on.
Deselect it to turn burst transmission off.