Zanussi ZWD 1662 W - Manual (Page 7)

7
Attention! Before selecting the “Drain” or the “Spin”
programmes, the selector dial must to be turned to the
“O” Off position.
Important!
The Rinse Hold option cannot be selected for the
automatic WASHING & DRYING programme.
4 “Easy Iron” button
Selecting this button the laundry is gently washed and
spun to avoid any creasing. In this way ironing is easier.
Furthermore the machine will perform 6 rinses instead
of 3 for cotton and 4 rinses instead of 3 for synthetics.
This function can be used only for Cotton and Synthetic
fabrics.
If this option is selected for cotton programmes, the spin
speed automaticaly will reduce to 900 rpm.
If this option is selected for synthetic programmes with
a temperature of 60°C or 50°C, the machine will
perform a washing cycle at max 40°C.
5 “1/2 Load Autodry” button
Select this option to reduce water consumption on the
rinse cycle when washing ONLY a smaller load of
cottons or linens (maximum load size = 3 kg).
The machine performs the rinses with less water.
Note
It is possible to select this option when selecting the
automatic Washing & Drying cycle (maximum load
size = 3 kg).
6 “Options” button
Press this button to select the following options:
• Prewash: select this option if you wish your laundry
to be prewashed at 30° C before the main wash (not
available for Wool and Mini 30° programmes).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
• “ Quick”: select this option for laundry that is only
slightly soiled (not available for E60° Cottons,
Mini 30° and Wool programmes).
The washing time will be reduced according to the
type of fabric and the selected temperature.
• Extra rinse: This option can be selected with all
programmes, except the Wool programmes and Mini
30°. The machine will add 2 rinses to the programmes
for cotton and 1 rinse to the programmes for
synthetics.
This option is recommended for people who are
allergic to detergents, and areas where the water is
very soft.
The Prewash, the Quick and the Extra rinse options
cannot be selected together by means of the relevant
button.
7 Display
The following pieces of information are shown on the
display:
• Duration of washing programme in hours and
minutes, after you have selected a programme.
While the programme is running (after you have
pressed the “Start/Pause” button), the displayed time
value decreases by one unit every minute.
• Selected drying time in minutes or hours and
minutes (max 130 mins).
After the programme has started the time remaining is
updated every minute.
• The washing machine has stopped with water in
the tub, at the end of a programme with the
“Rinse Hold” option or at the end of the “Soak 30”
programme: this is indicated by a flashing zero.
1.25
2.05
132978160.qxd 02/10/2006 9.59 Pagina 7 (Nero/Process Black pellicola)