Yamaha X-V2600 - Manual (Page 98)

94
SYSTEM OPTIONS
■ THX Set (THX settings)
Use to manually adjust the THX settings.
Manual Setup > Basic > THX Set >
SB Speaker Dist. (Surround back speaker
distance)
Use this feature to optimize the surround sound field when
you have to place the surround back speakers apart.
Choices:
U.S.A. and Canada models: under 1ft, 1 – 4ft, over 4ft
Other models: under 0.3m, 0.3 – 1.2m, over 1.2m
• Select “under 0.3m” or “under 1ft” if the distance
between the two surround back speakers is less than
0.3 m (1 ft).
• Select “0.3 – 1.2m” or “1 – 4ft” if the distance between
the two surround back speakers is between 0.3 and 1.2
m (1 and 4 ft).
• Select “over 1.2m” or “over 4ft” if the distance
between the two surround back speakers is more than
1.2 m (4 ft).
This menu adjusts the optional system settings.
1
Set AMP/SOURCE/TV to AMP and then press
GUI TOP on the remote control.
2
Press k / n on the remote control to select
Manual Setup and then press h.
3
Press k / n on the remote control to select
Option and then press h.
4
Select the desired parameters and then press
h to access and adjust.
Speaker Level
Information
Input Mode
THX Set SB Speaker Dist.
Output
Dimmer Dimmer
Speaker B Speaker B
Zone 3 Volume
Speaker Distance
Support Audio
Information
Input Mode
SB Speaker Dist. 0.3-1.2m
over 1.2m
Dimmer Dimmer
Zone 3 Volume
Input Assign
under 0.3m
Manual Setup (Option)
GUI TOP
TITLE
BAND
AMP
SOURCE
TV
A-E/CAT.
ENTER
PRESET/CH
A-E/CAT.
ENTER
PRESET/CH
Multi Zone
Dimmer
Audio Select
Decoder Mode
Sur.Initialize Option
Basic
Video
A-E/CAT.
ENTER
PRESET/CH
A-E/CAT.
ENTER
PRESET/CH
A-E/CAT.
ENTER
PRESET/CH