Zebra Technologies DA402 - Manual (Page 25)

Operator Controls
Refer to Figure 19.
Power Switch
n
Press to turn on and turn off the printer.
CAUTION: The power should be turned off before connecting
or disconnecting the communications and power cables.
Feed Button
n
Forces the printer to feed one blank label.
n
Takes the printer out of a “pause” condition. (The printer is put into
“pause” by either a ZPL II command or an error condition.) See “What
the Status LED is Telling You” on page 25.
n
Used for printer setup and status (see “Feed Button Modes” on page 31).
Status LED
n
Functions as a printer operational indicator (see “What the Status LED is
Telling You” on page 25).
19
Status
LED
Feed
Button
Power
Switch
Figure 19