ZyXEL Communications NBG410W3G - Manual (Page 138)

Chapter 7 DMZ Screens
NBG410W3G Series User’s Guide
138
7.3 DMZ Static DHCP
This table allows you to assign IP addresses on the DMZ to specific individual computers
based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your ZyXEL Device’s static DHCP settings on the DMZ, click NETWORK >
DMZ > Static DHCP. The screen appears as shown.
Figure 80 NETWORK > DMZ > Static DHCP
The following table describes the labels in this screen.
Table 25 NETWORK > DMZ > Static DHCP
LABEL DESCRIPTION
# This is the index number of the Static IP table entry (row).
MAC Address Type the MAC address of a computer on your DMZ.
IP Address Type the IP address that you want to assign to the computer on your DMZ.
Alternatively, click the right mouse button to copy and/or paste the IP address.