Yamaha CC-5 - Manual (Page 13)

Speaker connection
Connect each speaker wire to the SPEAKERS terminals as
shown. (Black wire with white line
→
plus (+) terminal, black
wire
→
minus (–) terminal)
Cautions
•
Do not let the bare speaker wires touch each other as this
could damage the amplifier and/or speakers.
•
When connecting the speakers to the unit, be sure to
connect the speaker wires properly. Do not mistake the
right channel for the left channel and the plus (+) terminal
for the minus (–) terminal.
• Do not connect these SPEAKERS terminals to speakers
other than the provided speaker system.
System connection
•
Connect the red connector to the red socket.
•
Connect the white connector to the white socket.
•
Connect the black connector to the black socket.
How to disconnect the system connector
Grasp both sides of the connector to disconnect the
connector.
Connecting the AC supply lead
• After connecting the speakers and system connectors,
plug the AC supply lead into a convenient AC outlet.
• Unplug the AC supply lead from the AC outlet if the unit is
not to be used for a long period of time.
PREPARATION FOR USE
E-11
Altavoz
derecho
Altavoz
izquierdo
To an
AC outlet