If something doesn't work – Zanussi T 613 User Manual

Page 15

Advertising
background image

35

The wash results are not as usual

The wash results are not as usual

The wash results are not as usual

The wash results are not as usual

The wash results are not as usual

The washing cycle is very much too long.

The washing cycle is very much too long.

The washing cycle is very much too long.

The washing cycle is very much too long.

The washing cycle is very much too long.

The washing machine stops during a

The washing machine stops during a

The washing machine stops during a

The washing machine stops during a

The washing machine stops during a
washing cycle.

washing cycle.

washing cycle.

washing cycle.

washing cycle.

The machine does not start up

The machine does not start up

The machine does not start up

The machine does not start up

The machine does not start up

The machine does not drain and/or does

The machine does not drain and/or does

The machine does not drain and/or does

The machine does not drain and/or does

The machine does not drain and/or does
not spin

not spin

not spin

not spin

not spin

The machine does not fill

The machine does not fill

The machine does not fill

The machine does not fill

The machine does not fill

IF SOMETHING DOESN'T WORK ?

Check that :

was the wrong quantity or the wrong detergent

added ? Insufficient detergent leads to grey washes
and scale deposits in the machine. Check the
quantities more exactly.

were special stains pre-treated ?
were programme and temperature correctly

chosen ?

Check that :

the water pression is sufficient.
the pump filter is not obstructed.

there has not been a power breakdown.

Check that :

the water pression is sufficient.
the pump filter is not obstructed.
the mains fuse is intact.

there is not a rinse hold ending a washing

programme (see the programmes chart pages 29
and 30).

Check that :

the mains fuse is intact.
the appliance is plugged in,.
the lid is firmly shut.
the programme selector dial is correctly positioned.
the beginning of the programme has been ordered
(on/off pushbutton pushed on).
there has not been a power breakdown.

Check that :

the drain hose is not squashed or bent.

the drain filter is not clogged.

Check that :

the inlet water hose is opened and the water
pression is sufficent.
the lid of the appliance is closed.
there has not been a breakwater.

Problems

Problems

Problems

Problems

Problems

Solutions

Solutions

Solutions

Solutions

Solutions

Advertising