ZyXEL Communications NBG420N - Manual (Page 136)

Chapter 10 DHCP
NBG420N User’s Guide
136
Figure 88 Network > DHCP > Client List
The following table describes the labels in this screen.
Table 52 Network > DHCP > Client List
LABEL DESCRIPTION
# This is the index number of the host computer.
IP Address This field displays the IP address relative to the # field listed above.
Host Name This field displays the computer host name.
MAC Address The MAC (Media Access Control) or Ethernet address on a LAN (Local Area
Network) is unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired
address that is assigned at the factory. This address follows an industry
standard that ensures no other adapter has a similar address.
Reserve Select this check box in the DHCP Setup section to have the NBG420N
always assign the IP address(es) to the MAC address(es) (and host name(s)).
After you click Apply, the MAC address and IP address also display in the
Advanced screen (where you can edit them).
Apply Click Apply to save your settings.
Refresh Click Refresh to reload the DHCP table.