Zoom RT-123 - Manual (Page 48)

48
FUNCTION
Key
Settings
between open hi-hat and closed hi-hat with your foot, push the FS01 and press pad 5 (CLOSED
HAT). Then release the FS01 and press pad 7 (OPEN HAT). The sound of the first pad will be heard
as soon as the FS01 is pushed, also when the pad itself is not pressed.
■ Using the FS01 to set the tempo
Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [TEMPO] key. (The
indication "tAP" appears on the display.)
The FS01 will function in the same way as the [TEMPO] key. The tempo can be specified by pushing
it two times (tap tempo function).
■ Using the FS01 to control start/pause
Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [PLAY] key. (The
indication "Cont" appears on the display.)
The FS01 will function in the same way as the [PLAY] key. The unit switches between [Playback
start]
→
[Pause]
→
[Playback start from paused position] with every push.
■ Using the FS01 to control start/stop
Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [STOP/EXIT] key.
(The indication "Strt" appears on the display.)
The FS01 will function in the same way as the [STOP/EXIT] key. The unit switches between
[Playback start]
→
[Stop]
→
[Playback start] with every push.
■ Using the FS01 to control bass muting
Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [BASS MUTE] key.
(The indication "bMut" appears on the display.)
The FS01 will function in the same way as the [BASS MUTE] key. Pushing the switch once mutes the
bass and pushing it once more turns the bass on again.
■ Using the FS01 to mute a desired track
Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [-] key. (The indication
"MutE" appears on the display.)
When the FS01 is pushed, the currently selected track will be muted. To select the track, use the
[DRUM A], [DRUM B], or [BASS] key.
■ Using the FS01 to play a desired track solo
Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [+] key. (The
indication "SoLo" appears on the display.)
When the FS01 is pushed, all tracks except the currently selected track will be muted. To select the
track, use the [DRUM A], [DRUM B], or [BASS] key.
■ Using the FS01 to control continuous percussion sound
Press the [FUNCTION] key followed by pad 9 (FOOT SW) and then press the [REPEAT/STEP] key.
(The indication "rEP" appears on the display.)
When the FS01 is pushed in pattern mode while pressing a pad, the sound of that pad will be heard
continuously.