Zoom ADSL X4 - Manual (Page 48)

48 ADSL X4 User’s Guide
Appendix B
Front and Back Panels
The front panel of the X4 looks like this:
The following table describes each light on the front panel.
Light Description
USB Lights when the USB port of the X4 is plugged into the USB
port of a powered-up device. Blinks when data is sent.
LAN Lights when the ETHERNET jack of the X4 is plugged into
the Ethernet port of a powered-up device. Blinks when data
is sent.
LINK Blinks when the X4 is performing its startup sequence. Stays
on solid when the unit has synched up with its ADSL
connection.
Note: If the light fails to switch from blinking to steady after a
minute or two, check with your ADSL provider that the ADSL
connection is activated, or refer to Appendix D:
Troubleshooting on page 57.
PWR Lights when the X4 is plugged into a power source.