X-Micro Tech. EPIC - Manual (Page 9)

4.3. Selection / Fast Forward / Fast Backward
(1) To select during playback, slide Switch Controller upward
once for the previous file, and downward for the next one.
Playback will start from the beginning of the selection.
(Figure 4.3.1)
(2) To select in stop mode, slide Switch Controller until the
desired selection shows up in the display. Press Switch
controller to start play.
(3) To locate a particular point in a selection, Slide Switch
Controller up for fast backward and down for fast forward.
Playing time in the display will change accordingly. Release
Switch Controller and the playback will start from the time
indicated in the display.
Figure 4.3.1
4.4. Equalizer Settings
(1) Press Mode Key for 2 seconds until ”EQ” appears in the
display. (Figure 4.4.1) Press Switch Controller to enter the
menu of Equalizer Settings.
(2) Slide Switch Controller to select the following settings:
Normal Æ POP Æ JAZZ Æ CLASSICAL Æ ROCKÆ Normal.
Press Switch Controller again for confirmation, then the icon
will come out in the display. (Figure 4.4.2)
Figure 4.4.1
8