Zanussi T833V - Manual (Page 6)

26
USE OF YOUR APPLIANCE
The control panel
1. ON/OFF pushbutton " "
Press the on/off pushbutton, the programme
starts : the control lamp illuminates.
2. Control lamp
The control lamp illuminates when the appliance is
working (on/off pushbutton " " pressed). It
extinguished when the on/off pushbutton " " is
pressed off.
3. Quick wash pushbutton " "
This pushbutton allows to realize a quick wash on
the cotton programme B and on the synthetics
programme J.
4. Half load pushbutton " "
This pushbutton allows to wash small quantity of
linen not much soiled (2,5 kg) only on the cotton
programmes.
5. Spinning speed variator
It enables to choose the spinning speed :
from 300 to 850 rpm (model T833 V) or from 300
to 750 rpm (model T 733 V) for the cotton, synthetics
and wool programmes,
from 300 to 650 rpm for the delicate program-
mes.
Never turn the programme selector when the appliance is working.
1 2 7 3 4 6
and the following options:
the draining position " " in order to not spin
the laundry at the end of the cycle,
the rinse hold position " " so as to not drain
the water of the last rinse so that not creased
the laundry if this one is not immediately
unloaded of the drum.
6. Programme selector
It enables to select the most adapted programme
to the nature and degree of soil of your laundry.
Turn the programme selector clockwise to select
the chosen programme.
The programme selector indicates each pro-
gramme phase as it takes place.
At the end of the programme, the appliance stops
automatically on a stop position
"I" for all the
programmes or on a rinse hold position " I " if the
rinse hold position " " has been selected.
Never turn the programme selector anticlockwise.
7. Temperature selector
It enables to choose the most adapted temperature
between cold (
) and 90°C.
Choose the temperature which corresponds to the
chosen programme, with the help of the indica-
tions or the programme table, according to the
fibers and the fastness of the colours.
5