Z Microsystems 15 - Manual (Page 18)

Doc# 27-0002UM Issued 7/99 Rev. 1.2
Monitor Adjustments
Making adjustments to the Command Console screen is a matter of perform-
ing the following easy On-Screen Display steps:
NOTE: The image is already
optimized for many
display modes, however
the user controls can be
used to adjust the image
to your liking.
NOTE: The settings saved after
adjustment and when
existing the OSD and will
be effective thereafter.
NOTE: After making adjust-
ments, the Power
indicator LED will
briefly turn amber to
indicate that the new
value has been saved.
• Press any of the OSD control
buttons to display the main OSD
menu.
• Use the Arrow buttons to move
among the icons. Select an icon
and press OSD Enter to access that
function. If there is a submenu,
you can move between options
using the Arrow buttons, then press
OSD Enter to select that function.
Use the Arrow buttons to make
adjustments.
• Press the Exit button to move
backwards through the submenus
and exit from the OSD.
Operation
User Control Features
18