Xerox 701P40210 - Manual (Page 25)

Stock Management and Calibration
Color Management Guide 3-3
Tips for use of Xerox Qualified Stocks
Here are some general tips for using Xerox Qualified Stocks:
• You are able to modify certain attributes of Xerox Qualified
Stocks. Some fundamental attributes cannot be modified, as
they affect color processing.
The fundamental attributes are:
– Name
– Color
– Weight
– Coating
– Type (Type, Opacity, Drilled, Modulus)
– Finish (iGen3 only)
– Color group
• Xerox Qualified Stocks cannot be moved from color group to
color group. Only User Defined Stocks can be moved and
fully edited at will.
Calibration process overview
Refer to the on-line help for a detailed calibration procedure.
Prior to initiating the calibration process, the stock you plan to
use for calibration needs to be in a paper tray and that tray
programmed for that stock.
Begin by calibrating the DTP41 X-Rite Spectrophotometer.
NOTE: Calibrating the Spectrophotometer needs only be done
once a day.
You need the reflective strip card that has the same serial
number as the spectrophotometer. Follow the X-Rite
instructions.
In the DocuSP Color Manager: Associations window select a
stock or color group representative. Open the Calibration Wizard
and follow the on-screen instructions.
When calibration is complete, accept the calibration data. The
calibration is now assigned to the stock or color group used for
calibration.