Yamaha AW 1600 - Manual (Page 71)

Finding a location while you listen to the sound (the Nudge function)
7
Va
rious types of pla
ybac
k
71
AW1600 Owner’s Manual
“Nudge” is a function that repeatedly plays a short region before or after the current location. By
using the Nudge function, you can find a precise location while listening to the playback. This is
useful when you need to specify a location precisely, such as when specifying the auto punch-in/
out points, or when editing the contents of a track.
1
Locate to the vicinity of the point you want
to find.
2
With the transport stopped, press the [JOG
ON] key.
The [JOG ON] key will light, and the Nudge function
will be turned on. A fixed region (referred to as the
“nudge time”) starting at the current location will play
repeatedly.
3
To move the current location forward, turn
the [DATA/JOG] dial toward the right. To
move the current location backward, turn
the [DATA/JOG] dial toward the left.
If time display is selected as the counter display for-
mat, you can move the current location forward or
backward in millisecond units. If time code display is
selected, you can move in sub-frame units.
4
To turn off the Nudge function, press the
[JOG ON] key or the transport section
STOP [
■] key.
The [JOG ON] key will go dark, and the Nudge func-
tion will be turned off.
5
If you want to change the playback duration
or the playback mode, repeatedly press the
Work Navigate section [UTILITY] key or
hold down the [UTILITY] key and use the
CURSOR [
]/[ ] keys to access the PRE-
FER page of the UTILITY screen.
1 NUDGE MODE
Specifies the region of sound (before or after the cur-
rent location) that will be played by the Nudge func-
tion.
B NUDGE TIME
Specifies the duration of the region that will be played
by the Nudge function.
6
To change the playback duration (nudge
time), move the cursor to the value of the
NUDGE TIME field, and use the [DATA/JOG]
dial to set the nudge time.
You can set the nudge time in a range of 25 ms – 800
ms. (Default = 500 ms).
7
To change the playback position (nudge
mode), move the cursor to the NUDGE
MODE button, and press the [ENTER] key to
switch between the following two nudge
modes.
● AFTER
Repeatedly play for the duration of the nudge time,
starting at the current location (default).
● BEFORE
Repeatedly play for the duration of the nudge time,
ending at the current location.
Finding a location while you listen to the sound (the Nudge function)
Current
location
Nudge time
Song
track
• Even while using the Nudge function, you can use locate
points or markers to change the location, or register locate
points or markers (
→ p. 65).
HINT
1 2
NUDGE MODE: BEFORE NUDGE MODE: AFTER
Current location Current location
• You cannot change the nudge time or nudge mode while
using the Nudge function. You must turn off the Nudge func-
tion, and change these settings while the [JOG ON] key is
dark.
NOTE