Maintenance and cleaning – Zanussi ZBC 402 B/W User Manual

Page 10

Advertising
background image

10

MAINTENANCE AND CLEANING

Before carrying out any maintenance and cleaning

operations, make sure that the appliance is ISOLA-

TED from the electricity supply.

Helpful Tips

• Make sure the bottom of utensils and cooking areas

are clean and dry.

• Select the correct heat settings and use saucepans

large enough to accommodate the food to eliminate

boilovers and splattering.

• If possible, wipe up food spills from adjacent heating

areas before using the areas for cooking.

Note

• Use recommended ceramic hob cleaners only.

Cleaning

• To keep exterior trims and control panel in a spotless

condition, wipe after each use with a warm soapy

cloth.

• Wipe the control knobs with a damp cloth, which has

been wrung out in hot, soapy water, then dry tho-

roughly.

• Remove any food spills on the hob as soon as possible

with a damp cloth.

• Make sure that the hob is cool before applying any

cleaning materials.

Ceramic Hobs

Use Cleaner Conditioner daily. As it cleans, it leaves a

protective coating of silicone on the smooth surface,

which helps to prevent scratches and abrasions in which

food particles can collect. It also helps to prevent build up

of mineral deposits and will make future clean-ing easier.

• Apply a dab of cleaner in the centre of each cooking

zone to be cleaned (for normal cleaning, start with

about 5 ml spoonful of cleaner, apply more if needed).

Dampen a cloth and then proceed to clean the hob. To

remove more stubborn marks use a slightly dam-

pened non-stick pan cleaner (e.g. Scotchbrite or

Vileda).

• Wipe off this application with another clean damp

cloth and dry thoroughly.

• Any smearing or hazing on the surface can be removed

with a lightly dampened cloth and then be polished

with a soft dry cloth.

Note

• If a wet paper towel is used to remove spills from a

warm cooking area, be careful to avoid steam burns.

• Do not use a sponge or dishcloth. They will leave a film

of water and possible detergent on heating areas,

which will turn brown and resemble discoloura-tion,

next time the area is heated. If this happens, apply

Cleaner Conditioner to remove it.

How To Deal With Metal Marks

• Metal deposits can be identified as grey/brown marks

on the ceramic surface and are usually caused by

dragging saucepans with aluminium bases, parti-

cularly when new, across the ceramic surface.

• To avoid these marks, protect the surface of the hob

with Cleaner Conditioner and lift the saucepans

across the heated areas. Ensure that new aluminium

based saucepans are well scrubbed on the base to

remove any rough edges and take off any deposits left

from manufacture.

• The marks are easily removable, providing they are

cleaned off straight away using the recommended

cleaners, and are not allowed to burn onto the

ceramic surface for long periods.

About Discolouration

Discolouration occurs on the surface not IN it.

By following proper care and cleaning recommen-dations

the surface will remain clean and bright.

The cooking surface should be cleaned thoroughly each

day to remove all visible spills. Cleaner Conditioner has

been specially formulated, use only as much as

necessary. If the Ceaner Conditioner is used too gene-

rously, a heavy film may be left that will burn on and

discolour when the areas are heated. When this occurs,

lightly scrub the surface with a dampened non-stick pan

cleaner, this will help to loosen the excess Cleaner

Conditioner. Then wipe the surface with a dampenend

cloth and polish with a soft dry cloth.

Important notes

• In the event of the hob being scratched, spills will

collect and appear as fine lines. These are not fully

removable but can be minimised by the daily use of

Cleaner Conditioner. These scratches do not affect

the cooking peformance.

• Spills from sugar solutions MUST be removed from

the hob before the syrup has set, otherwise damage

to the glass ceramic surface will occur.

• Do not place aluminium foil dishes on the hot surface

as these will cause damage to the hob.

• Hobrite and Corning Cleaner Conditioners are the

current recommended cleaner for use on the ceramic

hob.

• Cleaner Conditioner is for the ceramic hob only and

must NOT be used as general all purpose cleaner.

Advertising