Yamaha EM5014C - Manual (Page 33)

33 EMX5014C Owner’s Manual
Specifications
Reference
■ Input Characteristics
*1 0 dBu is referenced to 0.775 Vrms.
*2 Input sensitivity: the lowest level that will produce an output of +4 dBu(1.23 V), or the nominal output level when the unit is set to maxi-
mum level. (All faders and level controls are at maximum position.)
*3 XLR-3-31 type connectors are balanced. (1/Sleeve=GND, 2/Tip=HOT, 3/Ring=COLD)
*4 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND )
*5 Phone Jacks are unbalanced.
■ Output Characteristics
*1 0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*2 Phone Jacks are unbalanced.
Input Terminals PAD GAIN
Actual
Load
Impedance
For Use with
Nominal
Input Level
Connector
Sensitivity *2 Nominal
Max. before
Clip
CH INPUT A
1-6
0 dB
–60 dB
3 kohms 50-600 ohms Mics
–80 dBu
(0.078 mV)
–60 dBu
(0.775 mV)
–40 dBu
(7.75 mV)
XLR-3-31 type *3
–16 dB
–36 dBu
(12.3 mV)
–16 dBu
(123 mV)
+4 dBu
(1.23 V)
26 dB
–34 dB
–54 dBu
(1.55 mV)
–34 dBu
(15.5 mV)
–14 dBu
(155 mV)
+10 dB
–10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
CH INPUT B
1-6
0 dB
–60 dB
10 kohms 600 ohms Lines
–80 dBu
(0.078 mV)
–60 dBu
(0.775 mV)
–40 dBu
(7.75 mV)
Phone Jack *4
–16 dB
–36 dBu
(12.3 mV)
–16 dBu
(123 mV)
+4 dBu
(1.23 V)
26 dB
–34 dB
–54 dBu
(1.55 mV)
–34 dBu
(15.5 mV)
–14 dBu
(155 mV)
+10 dB
–10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
ST CH INPUT B
7/8-9/10
–
–60 dB
3 kohms 50-600 ohms Mics
–80 dBu
(0.078 mV)
–60 dBu
(0.775 mV)
–40 dBu
(7.75 mV)
XLR-3-31 type *3
–16 dB
–36 dBu
(12.3 mV)
–16 dBu
(123 mV)
–10 dBu
(245 mV)
–
–34 dB
10 kohms 600 ohms Lines
–54 dBu
(1.55 mV)
–34 dBu
(15.5 mV)
–14 dBu
(155 mV)
Phone Jack *5
+10 dB
–10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
ST CH INPUT
11/12-13/14
–
–34 dB
10 kohms 600 ohms Lines
–54 dBu
(1.55 mV)
–34 dBu
(15.5 mV)
–14 dBu
(155 mV)
Phone Jack *5
RCA Pin Jack
+10 dB
–10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
CH INSERT
IN(1-6)
– – 10 kohms 600 ohms Lines
– 20 dBu
(77.5 mV)
0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone Jack *5
Output Terminals
Actual Source
Impedance
For Use with
Nominal
Output Level
Connector
Nominal Max. before Clip
ST OUT [L, R] 150 ohms 600 ohms Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack *2
ST SUB OUT [L, R] 150 ohms 600 ohms Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack *2
AUX SEND 1, 2 150 ohms 600 ohms Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack *2
EFFECT SEND 150 ohms 600 ohms Lines +4 dBu (1.23 V) +20 dBu (7.75 V) Phone Jack *2
CH INSERT OUT 1-6 600 ohms 10 kohms Lines 0 dBu (0.775 V) +20 dBu (7.75 V) Phone Jack *2
REC OUT [L, R] 600 ohms 10 kohms Lines –10 dBV (316 mV) +10 dBV (3.16 V) RCA Pin Jack
PHONES [L, R] 100 ohms 8 ohms/40 ohms Lines 1 mW/3 mW 20 mW/75 mW Phone Jack (TRS)
SPEAKER OUT 0.1 ohms 4 ohms Speakers 125 W 500 W
SPEAKON
Phone Jack *2