Yamaha AVX-S80 - Manual (Page 46)

CHANGING THE PARAMETER SETTINGS FOR DSP PROGRAMS
42
Adjusting the parameter settings for PRO LOGIC II Music
■
Changing parameter settings
You can adjust the values of PRO LOGIC II Music
parameters so the sound fields are recreated accurately in
your listening room.
1 Press AMP.
2 Select PRO LOGIC II Music.
Refer to “Selecting PRO LOGIC II” on page 24 for
details.
3 Press u / d to select the parameter.
4 Press j / i to change the parameter value.
5 Repeat steps 3 and 4 above as necessary to
change other parameters.
■
PRO LOGIC II Music parameter
descriptions
PANORAMA
Function: Turning the function on extends the front
stereo image to include the surround
speakers for wraparound effect.
Choices: OFF/ON, initial setting is OFF.
DIMENSION
Function: Gradually adjusts the soundfield either
towards the front or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the
front), initial setting is STD (standard).
CT WIDTH (Center width)
Function: Adjusts the center image from the center
and front speakers to varying degrees. The
larger the value, adjusts the center image
towards the front left and right speakers.
Control range: 0 (center channel sound is output only
from center speaker) to 7 (center channel
sound is output only from front left and
right speakers), initial setting is 3.
(U.S.A. model)
ENTERTAINMENT ROCK JAZZ HALL
4 3 2 1
MOVIE 2 MOVIE 1 MONO MOVIE SPORTS
8 7 6 5
STEREO MATRIX 6.1 SELECT /DTS
CANCEL 10 0 9
CODE SET
TOP MENU MENU
LEVEL SET MENU
TEST B.BOOST
ON SCREEN RETURN
ABCDE
MUTE
VOL
PRESET
PRESET
ENTER CH CH
DVD
AMP AMP
9 , 0
j , i
u , d
E8-S80-35-42(5.29)a 02.6.29, 4:34 AM 42