Chapter 5 command sets, Data command sets basic at command sets – ZyXEL Communications 56K User Manual
Page 39
User's Guide for ZyXEL Omni 56K and Omni 56K Plus Modems
5-1
Chapter 5
Command Sets
This chapter lists the command set Omni 56K/Omni 56K Plus supports. These commands include
data command sets, fax command sets and voice command sets.
Data command sets
Basic AT Command Sets
Command
Options
Function & Description
Ref.
A/
Re-execute the last command once.
A>
Re-execute the last command once or repeat
the last call up to 9 times. (See also S8)
<any key>
Terminate current connection attempt when
entered in handshaking state.
+++
Escape sequence code, entered in data state,
wait for modem to return to on line command
mode.
Table 11.
Basic AT Command Sets
All the Following Commands Require an “AT” Prefix:
Command
Options
Function & Description
Ref.
A
Go on-line in answer mode. (See also S39.2,
S43.6)
Bn
Handshake option.
S28.7
B0 *
Select CCITT V.22 for 1200 bps
B1
Select Bell 212A for 1200 bps
communication.