XM Satellite Radio SKYFi3 - Manual (Page 24)


Personalizing Your SKYFi 3

Personalizing Your SKYFi 3
Display Settings
Brightness
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Preferences” and press the Play/Pause button to select it.
3. Scroll to “Change Display” and press the Play/Pause button to select it.
4. Scroll to “Brightness” and press the Play/Pause button to select it.
5. Select “Brightness” or “Contrast” with the up and down arrow buttons
and use the left and right arrow buttons to adjust each.
6. Press the Play/Pause button to confirm your setting.
Backlight Timer
You can change the amount of time that your SKYFi 3 ’s screen backlight
remains lit.
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Preferences” and press the Play/Pause button to select it.
3. Scroll to “Change Display” and press the Play/Pause button to select it.
4. Scroll to “Backlight Timer” and press the Play/Pause button to select it.
5. Use the up and down arrow buttons to select the desired time period
and press the Play/Pause button to confirm your selection.
See the “Getting Started - Display” section (page 7) for additional display
options.
Audio Settings
EQ Set
You can set the tone quality of your SKYFi 3 player to match the type of
music you are listening to.
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Preferences” and press the Play/Pause button to select it.
3. Scroll to “EQ Set” and press the Play/Pause button to select it.
4. Use the up and down arrow buttons to select the tone type that you
prefer and press the Play/Pause button to select it.
FM Audio Level/Line Out Level
Use these settings to change the audio output level that SKYFi 3 is transmit-
ting to your FM radio, or sending to your stereo when connected to the Line
Out jack.
1. Press the Menu button, scroll to “Settings” and press the Play/Pause
button to select it.
2. Scroll to “Setup” and press the Play/Pause button to select it.
3. Scroll to “FM Audio Level” (car cradle only) or “Line Out Level” (if con-
nected and in the car or home cradle) and press the Play/Pause button to
select it.
4. Use the left and right arrow buttons to decrease and increase the audio
output level and press the Play/Pause button to select it.