Zoom Game Point! 4420 User Manual
Page 43
Appendix C: Setting Up an AdHoc Network
43
9999
When a confirmation message appears, click OK to change the
operating mode. Another message will appear letting you know
that it may take a few moments while the unit resets itself and
changes its mode. Click OK. (Once the Game Point! reboots
itself, you will be prompted to log into the Web Management
Interface again.)
10
10
10
10
Click Wireless in the left navigational menu, then click
Settings. Enter an SSID for the AdHoc network. Then
enter a channel. Click OK when asked to confirm this
choice. (For information about using the Wireless
Settings page, see page 25.)
11
11
11
11
Click LAN in the left navigational menu, then click LAN
Settings. Enter 10.0.0.201 in the IP Address boxes. This
is now the IP Address of the Game Point! Device 1. Keep
the default Subnet Mask 255.255.255.0.
12
12
12
12
Click the Logout icon at the top right of the screen, then
close your Web browser.
13
13
13
13
Unplug the Game Point! Device 1 from your computer.
Plug in Game Point! Device 2.
14
14
14
14
Open a Web browser, type 10.0.0.200 in the address bar,
and then press Enter. (This is the default IP address of the
Game Point! Device 2.)
15
15
15
15
Repeat steps 5-9 then continue with step 16.
16
16
16
16
Click Wireless in the left navigational menu, then click
Settings. Enter the SSID of the network that you entered
for the Game Point! Device 1. Then enter the same
channel. Click OK when asked to confirm this choice.
17
17
17
17
Click LAN in the left navigational menu, then click LAN
Settings. Enter 10.0.0.202 in the IP Address boxes. This