Xerox XA7 SERIES - Manual (Page 13)

Installation
12 Xerox© LCD Monitor User’s Manual
If the screen displays “out of range”, please follow the
instructions below to set up:
•
Press the MENU button to display the OSD.
•
Press the UP or DOWN button to highight the (INPUT
SELECT) icon, then press the MENU button. The OSD
displays:
•
Press the UP or DOWN button to select DIGITAL INPUT.
1
Turn off the computer and unplug the power cable.
2
Connect the signal cable (DVI-I) to the DVI port on the back
of the computer.
3
Connect the AC power cable to the power socket on the
back of the monitor.
4
Plug the computer and monitor power cables into a nearby
outlet.
5
Press the POWER/ button on the front panel of the LCD
monitor to turn the monitor on, then turn the computer on. If
the monitor displays an image, the monitor is successfully
installed. If no image is displayed, check all connections.
4
2 Connect to the DVI port
3
1 2 1 2
DIGITAL INPUT
Connect to
wall outlet
Method 2: Digital(DVI) Connection