Before the first use, Quantity of detergent to be used, Degrees of water hardness – Zanussi ZWF 14280 W User Manual

Page 12

Advertising
background image

12

Quantity of detergent to be used

The type and quantity of detergent will depend

on the type of fabric, load size, degree of

soiling and hardness of the water used.

Water hardness is classified in so-called

«degrees» of hardness. Information on

hardness of the water in your area can be

obtained from the relevant water supply

company.

Follow the product manufacturers’ instructions

on quantities to use.

Degrees of water hardness

Follow the product manufacturers’ instructions

on quantities to use.

Level

Degrees

German

°dH

French

°T.H.

Characteristic

1

0-7

0-15

soft

2

8-14

16-25

medium

3

15-21

26-37

hard

4

> 21

> 37

very hard

Before the first use

WARNING!

Ensure that the electrical and water

connections comply with the installation

instructions.

IMPORTANT!
Remove the polystyrene block and any

material from the drum.
IMPORTANT!
Pour 2 litres of water into the main wash

compartment

of the detergent drawer in

order to activate the ECO valve. Then run a

cotton cycle at 95°C, without any laundry in the

machine, to remove any manufacturing residue

from the drum and tub. Pour 1/2 a measure of

detergent into the dispenser drawer and start

the machine.

Use less detergent if:

you are washing a small load,

the laundry is lightly soiled,

large amounts of foam form during washing.

Smart 132973840.qxd 11/09/2007 10.43 Pagina 12

Advertising
This manual is related to the following products: