Yamaha HTR-5630RDS User Manual

Page 66

Advertising
background image

English

E-

5

Ⅵ Mounting the main/rear speakers (and rear center speaker for

NS-P106)

Mount the main/rear speakers (and rear center speaker for
NS-P106) on a shelf, rack or directly on the floor, or hang
them on the wall.

To mount the speakers on a wall by
using the holes on the speakers’
back panels

1

Fasten screws into a firm wall or wall support as shown
in the figure.

2

Hang the speaker by mounting the holes on the
protruding screws.
* Make sure that the screws are securely affixed by the

narrow parts of the holes.

WARNING
● Each speaker weighs 0.9 kg (2 lbs.). Do not mount

them on thin plywood or a wall composed of a soft
surface material. If mounted, the screws may pull out
of the flimsy surface and the speakers may fall. This
may damage the speakers or cause personal injury.

● Do not affix the speakers to a wall using nails,

adhesives, or any other unstable hardware. Long-
term use and vibrations may cause the speakers to
fall.

● To avoid accidents resulting from tripping over loose

speaker cables, fix the cables to the wall.

● Select an appropriate position on the wall to mount

the speaker so that no one will injure his/her head or
face.

1

70 mm

Holes

2

W

all/ w

all

suppor

t

Tapping screw
(Available at the
hardware store)

Min.
20 mm

Diam. 3.5 to 4 mm

10 mm

70 mm

70 mm

Using the Yamaha Speaker Stand SPS-80 (option)
By using the Yamaha Speaker
Stand SPS-80, speakers can be
placed on the floor.

* The SPS-80 is not available in some areas.

SPS-80

NS-P100-106 ENG(UB)a

03.2.21, 9:08 AM

5

Advertising