ZyXEL Communications G-100 - Manual (Page 18)

18
PROBLEM CORRECTIVE ACTION
Cannot start the
ZyAIR Wireless
LAN Utility. Make sure the ZyAIR is properly inserted and the LINK LED
blinks.
Check for possible hardware conflicts. In Windows, click Start,
Settings, Control Panel, System, Hardware and then click
Device Manager. Verify the status of the modem under
Network Adapter. (Steps may vary depending on the version
of Windows).
Install the ZyAIR in another computer. If the error persists, you
may have a hardware problem. In this case, you should contact
your local vendor.
The ZyAIR
Wireless LAN
Utility displays
only three tabs. When the ZyAIR Wireless LAN Utility displays only three tabs,
you are using the Windows XP wireless configuration tool at the
same time. Refer to the Disable Windows XP Wireless
Configuration Tool section to disable the Windows XP wireless
configuration tool.