Zenith DSV-110 - Manual (Page 14)

When PAL/SECAM video is connected
brightness, contrast and saturation will be
available.
All options will be available when NTSC video
is connected.
Select OK to save your changes and exit, or
select Cancel to exit without saving your
changes. Selecting Default restores factory set-
tings.
7.3.2 Audio control
Audio control
Select this function when you have connected
an audio signal to the ‘Audio in’ on the projec-
tor connectors (or through the EVC cable). Use
the four sliders to adjust volume, bass, treble
and balance.
Select Internal Mute to mute the internal
speaker. Select External Mute to mute the
external audio output.
Select OK to save your changes and exit, or
select Cancel to exit without saving your
changes.
Selecting Default restores factory settings.
7.3.3 Zoom/Focus adjustments
Zoom and focus adjustments
In this menu you can adjust the Zoom and
Focus of the projector by clicking on the up
and down arrows in the menu. When you have
adjusted the image to your satisfaction, click
on the OK button to exit and save your new
settings.
7.3.4 Color manager
Color tone settings
The color manager is designed to give you
optimal performance from your projector, inde-
pendent of ambient lighting conditions.
In the color manager menu you can choose
between four pre-defined Color settings.
7.3.5 Picture positioning
Picture positioning
Adjust vertical and horizontal position of the
picture on the screen with the two sliders.
Select OK to save your changes and exit, or
select Cancel to exit without saving your
changes.
2 7 2 6