Xerox 8264E EN - Manual (Page 36)

3 Basic Operation
30 8254E / 8264E Quick Start Guide
3.5 8254E Cutting media manually
1. Feed the roll media to the media cut position after printing.
• “Manual Cut -> ENTER” displays in the control panel.
• Pay attention to the following points when you cut roll media. Mishandling the
razor blade may cause a cut on your finger or hand.
• When you hold media, do not place your finger on the media cut groove.
• Move the razor blade along the media cut groove.
2. Place a razor blade on the media cut groove on the media guide, and cut the roll media.
The cutting roll media manually operation is complete.
No. Name
1 Media guide
2 Media cut groove
3 Razor blade