ZyXEL Communications P-660HW-T v2 - Manual (Page 249)

P-660HW-T v2 User’s Guide
Chapter 19 Tools 249
Figure 143 Configuration Restore Error
19.2.3 Back to Factory Defaults
Pressing the RESET button in this section clears all user-entered configuration information
and returns the ZyXEL Device to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyXEL Device. Refer to the chapter about introducing the web configurator for more
information on the RESET button.
19.3 Restart
System restart allows you to reboot the ZyXEL Device without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device reboot. This
does not affect the ZyXEL Device's configuration.
Figure 144 Restart Screen