Zanussi FC 1200W - Manual (Page 9)

- 9 -
- Rinse-hold is an optional function available for the Synthetics, Delicate, and Wool programmes. To select
rinse-hold, press the option button on the machine control panel. Rinse-hold means that the programme halts and
the water from the last rinse is retained in the machine to minimise creasing in synthetic fibres.
Once the programme has stopped on rinse-hold, if you wish to end the wash with both emptying of water and
spinning of the load, press the option button again so it pops out.
If you wish to end the wash by emptying the water without spinning, you have to advance the programme control
knob manually, to programme setting L. Before you advance the programme control knob manually, we recommend
that you first press the On/Off button to switch the machine off (button pops out). Once the programme control knob
is set at L, press the On/Off button again (button remains in) to complete the programme.
Synthetics and Delicate (dry load weight: 1.5 kg)
Wool (dry load weight: 1.0 kg)
Load
type
Synthetics
Drain
Synthetics
Delicate
fabrics
Woollens
Normally
soiled
Lightly
soiled
Normally
soiled
Lightly
soiled
F
L
F
G
H
60
40
30
40
~74
~2
~74
~56
~50
60° programme without
pre-wash.
3 rinses and spin at
600 rpm.
Draining
40° programme without
pre-wash.
3 rinses and spin at
600 rpm.
30°-40° programme
without pre-wash.
3 rinses and spin at
600 rpm.
-40° programme
without pre-wash.
3 rinses and spin at
600 rpm.
Degree of
soiling
Temp.
setting
Progr.
selection
Progr. time
(min.) ❋
Programme
content
Spin
K
~8
Emptying and spin at
600 rpm.
❋ The programme times are intended as a guide only. The actual time will vary depending on incoming water
pressure and temperature.