Zap XEBRA D555 - Manual (Page 9)

MIRRORS
HORN
TURN SIGNALS
The rear view mirror on the windshield should be set so that you can comfortably see behind the vehicle. It is
recommended that you have a point of reference behind the vehicle so that you can properly see other
vehicles or obstructions such as poles, fire hydrants or bicycles. Since the back window is level with most
truck or SUV headlights, it may be necessary while driving at night or through tunnels to adjust your mirror.
Side view mirrors are adjusted by pressing gently on the bottom corners of the right and left side of the mirror
itself. Have someone help you set the passenger's side mirror for optimal rear view. You may install a blind
spot mirror on the side mirror to give you a better peripheral view. These can be purchased at any auto parts
store.
IMPORTANT: If you press too hard on the side mirror glass while making the adjustments, you may crack the
mirror, so be gentle. Never clean the mirrors with an abrasive or dry paper towels, this will scratch them.
The horn is located in the center of the steering wheel. It is powered by electricity. The key must be on for the horn to operate.
The right and left blinker lever is on the left side of the steering column. You should always signal 10-15
seconds before you intend to make your turn. Given the size of your Xebra, be aware that you may be in other
vehicles' blind spots.
The turn signals are self-centering, so they will return to neutral after the turn. However, if the turn is too
gradual, manual re-setting may be required.
17
Owner’s Manual
LIGHTS
The Xebra has three lights in the front. The center is the running light. It is always on when the key
is on. It has two settings, high and low. The center light high/low switch is located on the console.
Toggle the switch for high and low.
Read the ADDITIONAL INFORMATION REGARDING THE XEBRA ZAPTRUCK for information the pickup’s spare tire.
The control for the two headlights is found on the same lever as the turn signal, on the left side of
the steering column. Turn the dial counter-clockwise to turn on the lights. The first position is off.
Second position causes the headlights to turn on similar to running lights. Third causes each
headlight's main bulb to be lit as a low beam light. Fourth position is the same as second position.
On the Xebra ZAPTRUCK all locks are manual. Additionally, there are no child safety locks. Please keep your children in their seat
belts at all times and be alert. Unlock the Xebra from the driver's side. Always lock and unlock with the key to avoid locking the keys
inside. If you do lock yourself out of the Xebra, contact your roadside assistance provider to open it. Do not attempt to open with a coat
hanger, as you may damage the interior of the door or window mechanism, etc.
LOCKS
SPARE TIRE/JACK
The Steel Xebra Sedan comes with Central Electronic Door locks and Key Fob.
The Steel Xebra Sedan does NOT come with a spare tire. Optional spare tire can be purchasedfor $50.
.
18
Owner’s Manual