Yamaha DG100-212A - Manual (Page 16)

16
S412V/S112
Using the S412V/S112
■ Connecting
1. Turn the amp’s power OFF and set the volume
to “0”.
* Connecting the speaker with the power ON or the vol-
ume turned up may result in damage to the speaker
or amp.
2. Using the supplied speaker cord, connect the
phone jack located on the back of the S412V/
S112 cabinet to the amp head’s speaker out-
put jack (the SPEAKER jack on the DG Series
Amplifier).
The S412V is a speaker enclosure equipped with four Celestion “Vin-
tage 30” speakers.
* The power rating is 240 W. Use an amp head with a power
output of less than 240 W.
* The impedance is 8
Ω
. Check the amp head’s impedance and
make sure it meets the speaker’s requirements.
* If you use more than two speakers, make sure the total im-
pedance meets the amp head’s requirements. See “Connect-
ing Speakers” section on page 8.
The S112 is a speaker enclosure equipped with a Celestion “G12H-
100” speaker.
* The power rating is 100 W. Use an amp head with a power
output of less than 100 W.
* The impedance is 8
Ω
. Check the amp head’s impedance and
make sure it meets the speaker’s requirements.
* If you use more than two speakers, make sure the total im-
pedance meets the amp head’s requirements. See “Connect-
ing Speakers” section on page 8.
■ Specifications
Speakers 30 cm speaker (Celestion “Vintage 30”) x 4
Power Rating 240 W
Impedance 8
Ω
Dimensions 765 x 820 x 359 mm
(WxHxD) (30.1” x 32.2” x 14.1”) (w/casters)
Weight 44.0 kg (97 Ibs) (w/casters)
Accessory Speaker Cable
● Speaker
Speaker Size 30 cm (12”)
Voice Coil Size 44ø mm
Magnet Ferrite 1.42 kg (50 oz)
Frequency Range 70 Hz – 5 kHz
Sensitivity 100 dB (1 m/W)
Power Rating 60 W (RMS)
Nominal Impedance 8
Ω
Fundamental Frequency 70 Hz
* Specifications and external appearance are subject to change without notice.
■ Specifications
Speaker 30 cm speaker (Celestion “G12H-100”) x 1
Power Rating 100 W
Impedance 8
Ω
Dimensions 542 x 510 x 284 mm
(WxHxD) (21.3” x 20” x 11.2”)
Weight 16.0 kg (35 Ibs 4.4 oz)
Accessory Speaker Cable
● Speaker
Speaker Size 30 cm (12”)
Voice Coil Size 44ø mm
Magnet Ferrite 1.42 kg (50 oz)
Frequency Range 82 Hz – 5.5 kHz
Sensitivity 100 dB (1 m/W)
Power Rating 100 W (RMS)
Nominal Impedance 8
Ω
Fundamental Frequency 82 Hz
* Specifications and external appearance are subject to change without notice.