ZyXEL Communications P-660H-D Series - Manual (Page 139)

P-660R/H-D Series User’s Guide
Chapter 13 Remote Management Configuration 138
C
H A P T E R
13
Remote Management
Configuration
This chapter provides information on configuring remote management.
13.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
Prestige interface (if any) from which computers.
When you configure remote management to allow management from the WAN, you still need
to configure a firewall rule to allow access.
You may manage your Prestige from a remote location via:
• Internet (WAN only)
• ALL (LAN and WAN)
• LAN only,
• Neither (Disable).
When you Choose WAN only or ALL (LAN & WAN), you still need to configure a firewall
rule to allow access.
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The Prestige
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP
13.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when: